This technical specification is intended for use when uploading broadcast quality files for TV streaming platforms that do not require local clearance body approval.
All files uploaded to Peach Connect are immediately run through an Auto QC process. To ensure files are not rejected please adhere to the guidelines below.
HD (1080/50i) | |
Container | MXF (OP1a) |
Video | |
Codec | AVC Intra |
Format Profile | High 4:2:2@4.1 |
Frame size | 1920 x 1080 |
Aspect Ratio | 16:9 |
Frame rate | 25 fps |
Interlacing | Upper Field First |
Bitrate | 100 Mbps |
Chroma Subsampling | 4:2:2 |
GOP Length | 1 (N=1), I frame only |
Audio | |
Format | PCM (Little Endian) |
Channels | 2 (1 channel per stream) |
Sample Rate | 48 kHz |
Bit Depth | 16 bits / 24 bits |
File Layout
Files must be exact duration; Content only. No pre or post roll such as clock/slate, bars, black, hold, freeze or audio tone is required.
Video Levels
Levels must be in accordance with ITU BT.709 for HD content, and EBU R103-2000 recommendations:
Luma = Level 16-235 (not RGB 0-255 level), equivalent to 0% - 100% or
0mV - 700mV. Chroma = Level 16-240, equivalent to maximum 100% RGB.
All content should be upper/first field dominant throughout and must be free of encoding artefacts, dropout, glitches, blocking, interlace issues or excessive aliasing and considered broadcast quality throughout.
Audio Levels
The audio Maximum True Peak level must not exceed -2 dBTP max.
It should also be free of any distortion, glitches or excessive sibilance and must be in phase and in sync with the video throughout.
Comentarios
0 comentarios
Inicie sesión para dejar un comentario.