Indonesia Technical Specifications

All files uploaded to Peach Connect are immediately run through an Auto QC process. To ensure files are not rejected please adhere to the guidelines below.

File Layout

Files must be accurate to frame on exact duration;

example: 15 seconds is made of 375 frames, 30 seconds is made of 750 frames.

TVC content only. No pre-roll or post-roll such as clock/clapper, bars, black, hold, freeze or audio tone is required.

Naming Convention

There is no naming convention enforced for Indonesia, Peach Connect is able to auto-generate a unique key number to every version delivered to aid in campaign organisation.

Video Levels

Levels must be in accordance with ITU BT.709 for HD content, and EBU R103-2000 recommendations: 

Luma = Level 16-235 (not RGB 0-255 level), equivalent to 0% - 100% or 

0mV - 700mV.

Chroma = Level 16-240, equivalent to maximum 100% RGB.

All content should be upper and first field dominant throughout and must be free of encoding artefacts, dropout, glitches, blocking, interlace issues or excessive aliasing and considered broadcast quality throughout.

Audio Levels

Unless stated otherwise, the Audio True Peak level must not exceed -1dBTP Peak (-9dBFS) mixes, to avoid any sound distortion or glitch.

Recommendation Audio levels = audio loudness recommendation is on -17 until -21 LUfs / Lkfs with / measure in -9dbfs sample peak. We can tolerate until -23LUfs / Lkfs but lower loudness means played out audio will be slightly lower if compared with other commercials. contact support.id@peach.me for assistance about how to measure Audio Loudness.

Audio should be free of any distortion, glitches or excessive sibilance and must be in phase and in sync with the video throughout.

Safe Area

Please ensure all On Screen Text is free from spelling and grammatical errors, and within the relevant Title Safety Suggestion: HD 16:9 Title Safe (10% in from each side), SD 4:3 Title Safe (20% from each side). Some broadcasters require HD 16:9 with 4:3 title safe.

Please check assets for any out-of-safe area before uploading as this is not included on the autoQC system check

Automated SD downconversion is available if only HD files are uploaded