It is now mandatory for content being delivered to Romania to include 4 channels of audio.
It is also optional for content being delivered to the Nordics to include up to 8 channels of audio.
Please see the relevant specs for details.
When exporting multichannel files please ensure the sequence is set up correctly.
Select the Tracks tab
Select the required Numbers of Channels
Add the relevant number of Audio Tracks
Depending on the the audio files available (Stereo or Mono) the Output Assignment and Pan/Balance will need to be configured.
The example below shows the configuration for tracks 1 and 2 being mono and therefore panned left and right, with track 3 being stereo and therefore centre panned.
Click Output Assignment
Set Tracks 1 - 2 to output via Channel 1 - 2
Set Tracks 3 - 4 to output via Channel 3 - 4
Set Tracks 5 - 6 to output via Channel 5 - 6 (if using)
Set Tracks 7 - 8 to output via Channel 7 - 8 (if using)
(By default all tracks will output via Channel 1 - 2 if not changed)
Click OK to save the sequence settings
Insert the Video and Audio files onto the timeline.
Again the example below show Track 1 & 2 as mono. These have been routed to Channel 1 & 2 and panned accordingly. Track 3 is a stereo Track and has been routed to Channel 3 & 4.
On playback you can check the level monitor to confirm that audio is being routed out of the correct channels.
Next Export the Files
Full Export guides can be found here Peach Connect Adobe Export Guides
However please ensure the additional settings below are configured..
Export Setting>Audio Tab
Set Channels to required number of channels (4, 6, 8)